The Gemini Pro comes in one size, 390 and is an improved version of the standard Gemini. It is a modernised classic look awning packed full of features. It uses the new HydraDore SL Pro fabric which gives you a great balance between lightweight, easy to use awning with added durability making it last longer.
It is inner tent ready, and can have one or two inner tents inside, allowing you to add bedrooms for those extra guests if needed. There are 5 doors available on the awning, with an eyebrow canopy over the front centre door stopping the rain and water coming in when the door is opened. It also features the unique Advanced Air System, which is the only system on the market that allows you to have this awning in multi inflation or single inflation modes, the choice is up to you. This awning is perfect for those looking for a large family awning that is easy to use, lightweight with added durability from the HydraDore SL PRO fabric.
The Advanced Air System (AAS) is a high specification air tube system. It has been created to give you the benefits of both a multi-inflation system as well as the ease of use of a single inflation system. The system uses 4 layers for strength and stability. It has the internal bladder which is the part that you inflate. You then have a dual layer protective cover that has a PE and polyester covers bonded together, that adds protection and increases stability. The PE layer of the protective cover is also reinforced at the stress points giving it extra strength and stability. You then have a sleeve which is sewn into the awning which adds a final layer of protection and stability. This not only improves the protection around your air tube, as well as the stability of the awning as the tube is held in position better. The advanced air system also gives you the unique ability to choose between multi-inflation or single inflation. Out of the bag the awning is multi-inflation, allowing you to pump up the air beams individually, which makes each tube extremely easy to pump up. It also makes it easier to deflate as each tube defaults instantly by removing the value making it easier and quicker to deflate as no air gets trapped in the system. The use of separate tubes also gives you security against failure. If there is a failure only one tube is affected. But you can add the single inflation kit (purchased separately) at any time. The single inflation kit is screwed into place once, then left in and it becomes part of the system, turning the awning from multi-inflation into single inflation, so then the awning is inflated and deflated from one single point giving you great ease of use, especially if used in conjunction with an electric pump. The system also has you covered in the event of a failure. Firstly you can remove any affected part of the system, simply by unscrewing the affected tube. The main beam will self seal, leaving you the ability to fix the affected tube. Next the tubes themselves are designed so they can be fixed, by yourself on site, so there is no need to ruin your break and send the awning away to be repaired. You simply unzip the sleeve to get to the protective cover. This is then unzipped which gives you access to the bladder itself. This bladder can be removed, repaired using a puncture repair kit (we recommend using a professional repair kit as some cheaper kits have sub-standard glue) and then put back in. It also uses an easy to use single way valve for inflation which is simplicity itself; simply push the pump in and you are ready to go, there are no fiddly values or sockets, sheer simplicity and ease of use.
HydroDore SL PRO Fabric An advanced middleweight 150D material with a high performance coating giving a hydrostatic head of 4000mm. which is far and above the 1000mm considered fully waterproof ensuring that your awning will not leak and the material is waterproof.. It keeps the weight down making the awning or tent easier to use, pack away and erect, but the added durability means it will last longer. The high performance coating adds durability and gives a very high level of water proofing and protection against the weather.
Anti-Weather System (AWS) The anti-weather system is not one item but a host of improvements and updates that gives the awning better weather protection. There are additional weather panels sewn into the canvas at points where the weather could get in. This panel is P.U. coated on both sides and taped on both sides giving you better weather protection. There is additional guttering on external windows with zips, which add extra protection against the rain. All tie back points or pockets that are sewn in are made from 100% waterproof PVC rather than standard webbing material. Standard material can soak water up and eventually lead to leaks, the waterproof PVC simply does not.
Inner Tent Ready This awning is inner tent ready ready, which means it can gave at least one inner tent fitted inside the awning to give you that sleeping pod / sleeping area. The inner tent is simplicity itself, to fit it all you do is clip the inner tent in place using the toggles on the inner tent and the sewn in toggles points in the awing, they are even colour coded to make it easier. If you don’t want to use the inner tent during the day, you can simply remove it or even just drop it to the floor.
LED Ready This awning is LED ready, which means that it has LED light sleeves sewn into the awning. These allow you to slide in the LED lighting strips (available separately) giving you the perfect light solution for your awning.
Featuring the HydraDore SL PRO lightweight and durable fabric. Advanced Air System with single or multi-inflation. Anti-weather system for added protection . Two ventilation windows to front and full ventilation side doors, plus permanent, built in ventilation to minimise condensation. Three independent front panels and five doors (2 side, 3 front). Sewn in rear draught exlcuding pads & 3 storm poles included. Canopy over middle front door to keep the rain out. Great views with super-clear windows with internal blinds. Inner tent ready : Can take 1 or 2 air porch inner tents. LED Ready: LED Sleeves on the 4 internal beams. Double beading (4 and 6mm) for easy multi-vehicle attachment. Very large internal area thanks to the near vertical front panel.
To find out what size awning you need for your caravan or motorhome please see our: Awning Size Guide
Specifications Warranty: 12 months. Fabric: HydraDore SL PRO Windows: Super-clear foil HH: 4,000 mm. Awning rail height: 235 - 250 cm. Width: 390 cm. Depth: 250 cm. Straight rail width: 390 cm. Total rail width: 454 cm. Pack size: 115 x 35 x 35 cm. Awning only weight: 15.3 kg. Total weight: 17.6 kg.
Optional Extras Air porch universal inner tent Single inflation kit High volume bravo pump Breathable flooring Rear leg poles (pair) LED lighting Windshield Pro